When turned on, your Wireless Microphone Transmitters (Tx) will normally automatically connect with the Microphone Receiver (Rx).
In the event that one (or both) of your microphone Transmitters (Tx) is not making the connection with its Receiver (Rx), you will notice:
a) a blue flashing LED light on the transmitter above the ‘∞‘ symbol (see Tx 6 below).
b) the sound indicator bar on the screen of the Receiver (Rx) is missing (see Rx 1 below).
To pair your transmitters to the receiver:
1. Press and hold the power button on the transmitters (Tx 2) one at a time to turn them on. This should take a few seconds.
2. Now press and hold the Pair button (‘∞‘) on the Rx (Rx 6) for three seconds to enable pairing mode
3. Then single-click the power button on the transmitter (Tx 2) and wait a few seconds.
You're all set to live stream audio again!
This information comes from the microphone manufacturer's website.
Transmitter (Tx) (aka. the microphone)
1 USB-C Connector, 2 Power Button, 3 3.5mm TRS Input, 4 In-built Mic,
5 Battery Indicator LED, 6 Connectivity Indicator LED
Receiver (Rx)
1 LED Screen, 2 Power Button, 3 USB-C Connector, 4 3.5mm TRS Output, 5 Gain Control/Mute Button,
6 Pair Button/Channel Selection, 7 Merged/Split Mode Selector